2
www.masterappliance.com
Description & Introduction
Description & Introduction
Specications
The Master-Mite® is a versatile,
lightweight (only 28 ounces) heat gun
that features three heat ranges: 500°F,
650°F and 800°F. This “whisper quiet”
heat gun produces enough heat to
apply heat shrinkable tubing without ex-
cessive air velocity so delicate connec-
tors or components will not blow off the
work surface. While the Master-Mite
®
is lightweight and easy to hold for long
periods of time, it also comes standard
with a bench stand which adjusts to
four heights for hands-free operation.
Attachments and accessories are avail-
able for many varied applications.
Each Master-Mite
® heat gun comes
standard with a silver 650°F heating
element, a bench stand and one
heat shrink attachment for shrink
tubing. Should you require additional
elements and/or attachments, please
specify separately.
Heat guns are a source of
extremely high temperature
flameless heat. As with other
products which generate
extremely high temperatures,
regardless of your specific
application, extreme care and
caution should be observed
when using this product.
Therefore, we recommend
that you pay particular atten-
tion to the safety instructions
which we have provided for
your protection.
Size ..................... 8-7/8”L x 7”H
Weight ...................... 1-3/4 Ibs.
Motor .......................3300 RPM
Nozzle length ...................3-7/8” L
Nozzle opening ..................1” dia.
Cord length .......................7 ft.
Air velocity ....................700 FPM
Air volume ....................3.8 CFM
Housing Static Decay .....5000V to <0.01 sec.
Housing Surface Res. ....... <500 ohms/sq.
Thermal Cutout ................Standard
Part No. Color Temp. °F Temp. °C Voltage Wattage
20012
20013
20014
20033
20034
20035
20160
20161
20162
Blue
Silver
Black
Blue
Silver
Black
Blue
Silver
Black
500
650
800
500
650
800
500
650
800
260
343
427
260
343
427
260
343
427
120
120
120
220
220
220
240
240
240
340
475
525
400
450
500
400
450
500
Model Volts Max. Amps Ship Weight
10008 120 4.5 3 lbs.
10009 220 2.2 3 lbs.
10010 240 2.0 3 lbs.
Heating Element Nozzles
All 120V models are cULus listed.
Important Safety Instructions
WARNING: THIS PRODUCT
IS A SOURCE OF VERY HIGH
TEMPERATURE FLAMELESS HEAT.
AS WITH ANY ELECTRICAL TOOL,
WHEN USING HEAT TOOLS,
ALWAYS FOLLOW BASIC SAFETY
PRECAUTIONS, INCLUDING THE
FOLLOWING, TO REDUCE THE
RISK OF FIRE, ELECTRIC SHOCK
OR PERSONAL INJURY.
1) Read and understand this
instruction manual before using.
Save this manual for future
reference.
WARNING: To reduce the risk
of fire or electric shock, do not
expose heat guns to rain or
moisture. Store indoors. Con-
nect to grounded outlet only.
2) Do not use plug adaptors or re-
move the ground prong from the
plug. This tool is equipped with
a 3-prong plug and a 3-wire
grounding system. Connect to
properly grounded outlets only.
3) Use heat gun only on adequate-
ly rated circuits to avoid over-
heating of electrical systems.
4) Do not direct hot air stream at
your clothing, hands or body
parts. Do not use as a hair
dryer.
5) Do not touch nozzle opening or
nozzle shield until cool. When
in “Hot” mode, extreme heat is
generated at those areas.
6) Run on “Cold” before turning
off. The nozzle and shield
require approximately 3 minutes
to become cool to the touch.
7) Do not touch work surface with
nozzle. Keep nozzle face at
least 1” away.
8) Keep a clean work area. Messy
or cluttered work areas invite
accidents or injury.
9) Keep away from children or
persons with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge. All visitors should
be kept at a safe distance from
the work area. Do not let visitors
touch the tool or extension cord.
10) Use tool in a well-ventilated
area. Do not use near flamma-
ble liquids or in an explosive
environment (where fumes,
gases or dust are present).
11) Remove all highly flammable
materials and other debris from
the work area.
12) Wear safety glasses at all
times.
To Next Page
Loading...
Need help?
General
