10
stances.
Fasten the bracket to the wall by means of 2 dowels at least, passing
through the A holes (g. 1). Use the B holes just as reference (g. 1).
The heater can be angled on its bracket in correspondence to the C
screw, and the modules can be pointed in correspondence to the D
couplings (g. 2 ). When the adjustment has been made, tighten all
the screws.
Ceiling mounting with chains (not provided)
Fasten the chains (having an appropriate length) to the ceiling, and
hook them to the heater in corrispondence of all the four E holes by
means of the “S” shaped rings enclosed inside the packaging (g. 3).
3. TECHNICAL FEATURES
The infrared Industrial Heaters range is constituted by appliances
having one, two, or three modules. Each module can have a 1500
W or a 2000 W lamp. The lamps of the models LG (Low Glare) are
characterized by having a low brightness (Table 2).
Model
FACT 20-
FACT 20LG
FACT 40-
FACT 40LG
FACT 60-
FACT 60LG
Power
supply
220-240 V ~
50-60 Hz
220-240 V ~
50-60 Hz
220-240 /
380-415 V ~
50-60 Hz
3P+N
Power
1 x 2000 W 2 x 2000 W 3 x 2000 W
Lamps
1 2 3
Range
9-12 m² 12-16 m² 16-20 m²
Weight
2.2 kg 3.0 kg 3.8 kg
4. USE INSTRUCTIONS
The Industrial infrared heater was designed for zone heating on large
premises. Production departments, churches, gymnasiums are ide-
ally application sites. With high efciency on heating from long dis-
tance, a compact size and a light weight a wide range on installa-
tion can be easy made. The comfort is immediate, no preheating is
necessary and this can give a large cost saving on wide air volume
or where there is discontinuous presence. The radiant heating give a
To Next Page
Loading...
Need help?
General
