EN
Warning:
Consult your physician before starting this or any exercise program.
If you experience dizziness or faintness, discontinue use of the bench immediately. Before
gettíng started please read your manual throughly. Follow all the safety instructions. We
assumes no responsibility for personal injury or property damage sustained by or through the
misuse of this product. We do not recommend use of this product by pregnant women or
persons with pre-existing health problems.
Weight on this product should not
exceed 100 kg (275 lbs)
How to assemble:
Before starting, lay out all parts and
hardware in a clear flat area.
Familiarize yourself with the parts and
assembly by carefully reading the
instructions.
STEP 1
Unfold the front leg and lock it with the
pin. Then, turn the seat over.
STEP 2
Lift up the cusion in order to set up the
square pipes (7). Aim the square pipe
(7) at the appropriate hole and insert the
pin to lock it.
STEP 3
Aim the right handle (4) at the round
pipe hole (18) and insert pin to lock it.
Aim the left (5) at the left round pipe
hole (18) and insert pin to lock it.
STEP 4
Insert right round pipe (4) into the
elbow (2) and then turn it to the left
side. Insert the other end of the elbow
and lock with pin. Then buckle up on
the other end of the elbow.
STEP 5
Fasten square pipe (22) to the
appropriate hole and insert the pin to
lock it.
STEP 6
Fold down for easy storage
Remove both pins from front leg (20b)
and remove round pipe support (14) to
fold down.
To Next Page
Loading...
Need help?
General
