NEVER LEAVE A FAN UNATTENDED WHILE OPERATING
OR WHILE CONNECTED TO A POWER SOURCE
© 2018, Pinnacle Climate Technologies, Inc. High Velocity Fan User’s Manual
- Before operating always check fan for loose
or damaged parts. Inspect power cord for any
damage. Never use fan if any parts are
damaged or missing. Never use fan without
safety guards attached.
- Operate only on 120 volt 60 Hz (cycle) current
with a minimum of a 15 amp circuit.
- When used with an extension cord, use only
cord of proper size (Amp rating), UL listed, and
with receptacle to accept three prong grounded
plug furnished on the fan’s power cord. Always
keep power cord and extension cords away
from heat, oil, and sharp edges. Inspect cords
periodically and replace if damaged.
Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and regulations.
When servicing or replacing a component requires the removal or
disconnection of a safety device, the safety device is to be
reinstalled or remounted as previously installed before operating
this fan.
Use this fan only in the manner intended by the manufacturer. If
you have any questions, contact Customer Service at 800-779-
3267.
12"/20" Floor Fan
MAC-20F
'
(
7
6
,
/
&0
86&
MAC-30BCT
'
(
7
6
,
/
&0
86&
2
'
(
7
6
,
/
&0
86&
20" Omni Floor Fan
MAC-20FOMNI
24" Barrel Fan
MAC-24DCT
30" Floor Fan
MAC-30P
24"/30" Pedestal Fan
'
(
7
6
,
/
&0
86&
'
(
7
6
,
/
&0
86&
MAC-30POSC
MAC-24POSC
MAC-24P
'
(
7
6
,
/
&0
86&
MAC-30W
24"/30" Wall Fan
MAC-30WOSC
MAC-24WOSC
MAC-24W
36" Cradle Fan
'
(
7
6
,
/
&0
86&
MAC-36DCT-BDF
MAC-12F
To Reduce The Risk Of Electric Shock, Do Not Expose To Water
Or Rain. This unit is designed for indoor use only.
To Next Page
Loading...
Need help?
General
