NEVER LEAVE A FAN UNATTENDED WHILE OPERATING
OR WHILE CONNECTED TO A POWER SOURCE
© 2018, Pinnacle Climate Technologies, Inc. High Velocity Fan User’s Manual
Installation and Assembly
1. Place the fan on level ground in a safe,
desired position then connect to an approved
power source.
NOTE: This model CAN NOT be wall mounted.
12" & 20" FLOOR FANS / 24" BARREL FANS / 36″ CRADEL FAN:
MAC-12F / MAC-20F / MAC-20FOMNI / MAC-24DCT / MAC-36DCT-BDF
4
30" FLOOR FAN: MAC-30BCT
Installation and Assembly
1. Slide wheel axle through wheel support frame.
2. Slide one (1) wheel onto either side of axle.
3. Secure wheel with one (1) cotter pin.
4. Place the fan on level ground in a safe, desired position
and connect to an approved power source.
Exploded View (MAC-30BCT Only)
This 30" Floor Fan (MAC-
30BCT) is approved for
use with California’s BAR-
97 Emissions Inspection
System and meets all
BAR-97(EIS) required
specications and standards
Exploded View (MAC-24DCT Only)
24" BARREL FAN
To Next Page
Loading...
Need help?
General
