MasterCraft 054-1250-0 User Manual

10
ACCESSORIES & CARTON CONTENTS
AVAILABLE ACCESSORIES
WARNING: Use only accessories
recommended for this rotary tool.
Follow instructions that accompany
accessories. Use of improper
accessories may cause injury to the
operator or damage to the rotary tool.
Do not use any accessory unless you have
completely read the instructions or Owner’s
Manual for that accessory.
 Grinding stones
 Cut-off wheels
 Polishing wheels
 Wire brushes
 Bristle brushes
 Sanding drums
 Cutting bits
 Drill bits
 Dressing stones
NOTE: Most commonly used bits and
accessories with 1/16”, 3/32” and
1/8”shanks will fit this tool. Rotary tool
accessories such as a drill press designed
for other rotary tools may not fit this tool.
WARNING: If any part is missing
or damaged, do not plug the rotary tool
into the power source until the missing
or damaged part is replaced.
Carefully unpack the rotary tool and all its
components. Compare against the “Rotary
Tool Components” chart.
NOTE: See illustration of rotary tool and
accessories on Pages 11, 12, 13 & 14.
WARNING: To avoid fire or toxic
reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar
highly volatile solvents to clean the tool.
CARTON CONTENTS
ROTARY TOOL COMPONENTS
KEY
DESCRIPTION
QTY
A
Flexible shaft
1
B
General purpose
accessory kit (see
Pages 12, 13 & 14 for
contents)
1
C
C-clamp
1
D
Hang rod
1
E
Rotary tool
1
Tote (not illustrated)
1
Owner’s manual
1
!
!
!

MasterCraft 054-1250-0 Specifications

General

Brand	MasterCraft
Model	054-1250-0
Category	Power Tool
Language	English