5
20V max* LITHIUM-ION CORDLESS CIRCULAR SAW - 054-8332-4
SAFETY GUIDELINES
Electrical safety
t
1PXFSUPPMQMVHTNVTUNBUDIUIFPVUMFUNever modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
t
"WPJECPEZDPOUBDUXJUIFBSUIFEPSHSPVOEFETVSGBDFTTVDIBTQJQFTSBEJBUPSTSBOHFTBOE
SFGSJHFSBUPSTThere is an increased risk of electric shock if your body is earthed or grounded.
t
%POPUFYQPTFQPXFSUPPMTUPSBJOPSXFUDPOEJUJPOT Water entering a power tool will increase the
risk of electric shock.
t
%POPUBCVTFUIFDPSE Never use the cord for carrying, pulling or unplugging the power tool. Keep the
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
t
8IFOPQFSBUJOHBQPXFSUPPMPVUEPPSTVTFBOFYUFOTJPODPSETVJUBCMFGPSPVUEPPSVTF Use of a
cord suitable for outdoor use reduces the risk of electric shock.
t
*GPQFSBUJOHBQPXFSUPPMJOBEBNQMPDBUJPOJTVOBWPJEBCMFVTFBHSPVOEGBVMUDJSDVJUJOUFSSVQUFS
('$*QSPUFDUFETVQQMZ Use of a GFCI reduces the risk of electric shock.
Personal safety
t
4UBZBMFSUXBUDIXIBUZPVBSFEPJOHBOEVTFDPNNPOTFOTFXIFOPQFSBUJOHBQPXFSUPPMDo not
use tool while tired or under the inuence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
t
6TFQFSTPOBMQSPUFDUJWFFRVJQNFOU Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions, will reduce
personal injuries.
t
1SFWFOUVOJOUFOUJPOBMTUBSUJOHEnsure that the switch is in the off-position before connecting to a
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your nger
on the switch or plugging in power tools that have the switch on invites accidents.
t
3FNPWFBOZBEKVTUJOHLFZPSXSFODICFGPSFUVSOJOHUIFQPXFSUPPMPO A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
t
%POPUPWFSSFBDI Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
t
%SFTTQSPQFSMZ Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
t
*GEFWJDFTBSFQSPWJEFEGPSUIFDPOOFDUJPOPGEVTUFYUSBDUJPOBOEDPMMFDUJPOGBDJMJUJFTFOTVSFUIBU
UIFTFBSFDPOOFDUFEBOEQSPQFSMZVTFEUse of these devices can reduce dust-related hazards.