Matrix A7xi Ascent User Manual

5
TOOLS REQUIRED:
F Torque Wrench
F 17mm Wrench
F 6mm T-Wrench
F 8mm Allen Wrench
F 4mm Allen Wrench
F Phillips Screwdriver
ASSEMBLY
UNPACKING
Unpack the equipment where you will be using it. Place the carton
on a level at surface. It is recommended that you place a protective
covering on your oor. Never open box when it is on its side.
IMPORTANT NOTES
During each assembly step, ensure that ALL nuts and
bolts are in place and partially threaded.
Several parts have been pre-lubricated to aid in assembly and usage. Please do not wipe
this off. If you have diculty, a light application of lithium grease is recommended.
WARNING!
There are several areas during the assembly process that special attention must be
paid. It is very important to follow the assembly instructions correctly and to make
sure all parts are rmly tightened. If the assembly instructions are not followed
correctly, the equipment could have parts that are not tightened and will seem
loose and may cause irritating noises. To prevent damage to the equipment, the
assembly instructions must be reviewed and corrective actions should be taken.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer
Tech Support. Contact information is located on the information card.
DANGER!
• Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
Check with a qualied electrician or serviceman
if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided
with the product. If it will not t the outlet, have a
proper outlet installed by a qualied electrician.
WARNING!
• Connect this exercise product to a properly grounded outlet only.
• Never operate product with a damaged cord or plug even if it is working properly. Never operate any product if it
appears damaged, or has been immersed in water. Contact Customer Tech Support for replacement or repair.
Failure to follow these specications can cause damage to your product and can void the warranty:
• All video and power outlets must be functional the day of delivery / assembly of the product. The
client is responsible for any additional installation charges associated with return visits.
• Electrical supply may uctuate in your area. To ensure stable performance of the product, use the proper gauge wire.
PARTS INCLUDED:
F 1 Main Frame
F 2 Top Rail Covers
F 2 Pedal Arm Cover Sets
F 1 Upper Assembly
F 2 Link Arm Cover Sets
F 2 Upper/lower Dual Action Arms
F 2 Dual Action Arms Caps
F 1 Handlebar Set
F 1 Handlebar Set Cover (ALB only)
F 1 Incline Frame Cover
F 1 Top Cap Cover
F 1 Top Cap Cover Insert
F 1 Front Shroud
F 1 Console Adaptor Plate
F 1 Power Cord
F 1 Hardware Kit
Console sold separately

Matrix A7xi Ascent Specifications

General

Brand	Matrix
Model	A7xi Ascent
Category	Fitness Equipment
Language	English