Matrix C7xi User Manual

38
MANAGER MODE AND ENGINEERING MODE
3X & 5X CONSOLES:
These sections allow users to manipulate default settings for the machines. It may be accessed by pressing the Level Up/
Level Down keys simultaneously for 5 seconds. To change a setting, press “Enter” on the keypad under ‘Manager Mode’ or
‘Engineering Mode’ and use the level buttons and numeric keypad to enter a category and change the values. Pressing “Enter”
again will save the change. Pressing “Back” or “Stop” will bring you to the previous menu. To exit Manager or Engineering
Mode, hold “Stop” down for 5 seconds. Below is a list of the settings that can be changed.
MANAGER MODE SETTINGS: ENGINEERING MODE SETTINGS:
Default Age
Default Weight
Default Height
Default Time
Default Floors
Default Calories
Accumulated Time
Accumulated Floors
Language
Max Speed Level
Software Version
Speed/Distance Mode
Out of Order
Gender
Sound Mode
Maximum Time
Disable Errors
Speed Units
Machine Type
Power Save Time
Pause Time
Serial Number
E-Stop Switch
E-Stop Setting
Club ID
ErP Time
AM System
Audio Source
Volume Control
7XE AND 7XI CONSOLES:
These sections allow users to manipulate default settings for the machines. Manager Mode may be accessed by pressing
ENTER, 1, 0, 0, 1, Enter on the keypad. Engineering Mode may be accessed by pressing ENTER, 2, 0, 0, 1, Enter on the
keypad. The screen shots on the next page show what you will see when you enter Manager Mode and Engineering Mode.
This console has a fully integrated touch screen display. Lightly touch the screen and use the intuitive interface to adjust
the settings. Any and all changes made will be saved when the “home” button is touched in the upper left-hand corner of
the screen. Touching the “home” button will exit manager or engineering mode and return you to the main screen. It is not
necessary to touch this button after each setting is changed.

Matrix C7xi Specifications

General

Brand	Matrix
Model	C7xi
Category	Fitness Equipment
Language	English