Version 2.0 2015 IC-MXIC5B-02 Copyright by Indoor Cycling Group GmbH 2015 | www.indoorcycling.com
WARNING!
Please carefully observe the following instructions. The maintenance and care procedures
must be performed in the regularity set out, to ensure maximum operating safety and lifespan.
Irregularly observed maintenance and care procedures will lead to increased wear to the
product and will void the warranty. If you have any further questions on this topic, please
contact our technical support.
Please only use the acid- and solvent-free maintenance and care agent (e.g. Brunox)
recommended by us to prevent damage to components of the indoor cycle.
DAILY MAINTENANCE:
1. Make sure that the indoor cycle is leveled and does not rock
(if necessary adjust as described on p.19).
2. Cleaning: The indoor cycle must be regularly cleaned after each use for reasons of hygiene.
Ensure that there are sucient soft cloths or paper towels and maintenance and disinfection
agent available. First disinfect the saddle and handlebars with a suitable agent and then wipe all
bodily residues o the entire indoor cycle.
WEEKLY MAINTENANCE:
1. Cleaning: Depending on how often the indoor cycle is used, it must be extensively cleaned
once a week. To do this, spray a maintenance spray onto a soft cloth and clean all plastic parts,
the entire ywheel, exposed framework parts including stabilizers and the plastic casing.
Never spray the maintenance spray directly onto the ywheel, as this could cause the drive belt
to slip through (belt slip) and could have negative impact on E-brake functionality.
PREVENTIVE
MAINTENANCE
To Next Page
Loading...
Need help?
General
