Matrix KS 200-1 User Manual

22
The machine must be placed on a at, sturdy,
dry and well ventilated surface.
Sparks will be generated when grinding metals.
Ensure that there are no people or inammable
materials in the vicinity of ying sparks.
Never allow people, particularly children, to
approach to less than 5 metres from the
machine when it is operating.
Do not use the machine in damp or wet areas.
Check the goods for missing parts.
The machine must not be operated by
inexperienced persons or children.
Place the machine on a rm work surface. Check
the screws, nuts and bolts at regular intervals
and tighten them if necessary.
Before use, check the machine for signs of
damage, ensure that all parts function correctly
and check that all screws and bolts are secure.
If the machine does not function correctly pull
the power plug out of the socket immediately.
You should also do this if you hear abnormal
noise coming from the machine, the ON/OFF
button does not work correctly or the power
cable is defective.
Replacement discs must be kept in a dry place
where they cannot suer any damage from
falling.
Use only FEPA standard discs with a diameter of
100 mm. Other discs can explode or jeopardise
the safety of the operator when stressed.
The disc diameter must not dier from the
normal radius by more than 15 mm. Discs with a
diameter of less than 70 mm must not be used
in any circumstances.
The disc must rotate clockwise as indicated by
equipped with a residual current circuit-breaker.
Pull the plug when you are not using the device
or making adjustments.
Always guide the cable away from the back of
the tool.
Never cut, drill, or saw in concealed areas where
there may be electric, gas, or water lines. Use a
suitable detector to nd such lines.
Never attempt to repair, replace or manipulate
the cable or plug. Always have this work carried
out by trained personnel.
When the machine is working it will generate
dust which may be harmful, inammable or
explosive.
Take suitable safety precautions. Wear a dust
protection mask. Ensure that there is good
ventilation at the workplace.
Do not machine materials that contain asbestos.
Only use grinding tools whose maximum speed
is at least as high as the idling speed of the
machine.
Do not use damaged, non-round or vibrating
grinding tools.
Do not start the machine at idling speed. Always
switch o the machine at the ON/OFF switch
when you have nished working with it. This will
prevent you starting it in idling speed next time
you switch it on.
Check the direction of rotation. Always hold the
machine so that sparks and dust y away from
your body.
Never reach into rotating grinding tools.
Always switch o the machine and allow it to
reach a standstill before you put it down.
Repairs may only be carried out by trained
personnel using genuine spare parts.

Matrix KS 200-1 Specifications

General

Brand	Matrix
Model	KS 200-1
Category	Industrial Equipment
Language	English