20
Reversing the Doors
We recommend you seek the help of another individual to support the
doors whilst performing this operation.
1. Carefully prise o the cover cap for the top hinge and unscrew the
screws fixing the top hinge to the appliance, you should support the
upper door whilst doing this.
2. Carefully remove the upper door and place it somewhere safe. Note
that there are spacers between the door and the hinge; note how
many and their position.
3. Remove the central hinge by removing the 3 screws fixing it to the
appliance; support the lower door whilst doing this.
4. Remove the lower door and place it somewhere safe, again noting
the position of any spacer pieces.
5. Swap the previous top hinge to the opposite side at the bottom.
6. Refit the lower door using any spacers and position the central hinge
on the door. After removing the 3 cover caps, fix the hinge securely
to the appliance.
7. Swap the previous bottom hinge to the opposite side at the top.
Refit the upper door and the “new” top hinge and fix securely to the
appliance.
8. Fit the central cover caps and top hinge cover pieces in place to
complete the process.
9. Unscrew all four slider brackets from the doors and swap them over
to the side furthest from the new hinge positions, before the decor
door is fitted.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
