Matrix PGT 4 in 1-S User Manual

14
2.2 Intended use
Brush cutter, grass trimmer
The petrol brush cutter is intended to trim lawns
or grass, to cut scrub, shrubs, bushes and young
trees in the private area, depending on the
mounted cutting tool.
The device may not be used for other purposes.
The manufacturer does not assume any liability
in case of Improper use as well as changes to the
machine.
-Please also note the safety instructions, the
instructions for installation and operation, as
well as the other generally applicable accident
prevention regulations.
Pole-mounted powered pruner
The petrol pole-mounted powered pruner is
in accordance with the latest technology and
the recognized technical safety rules. However,
improper or incorrect use may present a hazard
to life and limb of the user or a third party or a
damage to the device itself and/or other property
assets.
The petrol pole-mounted powered pruner is
a portable, hand-held device equipped with
a cutting set attached to a shaft. This pruner
is designed exclusively for pruning trees and /
or other wood from the ground. The inserted
cutting set is a saw chain with guide rail.
This device is designed for private or home
use only and may not be used in a continuous
operation for commercial purposes. Any other
us or use going beyond this is considered as
improper use. The risk is borne by the user.
Intended use also includes observing the
operating and installation instructions as well as
observing the maintenance conditions.
3. Technical data
Engine:
Engine Type: 4-stroke engine; air cooled
Engine power (max.): 0.7 kW
Displacement: 31 cm
3
Max. engine speed: 10500 min
-1
Volume (fuel tank): 650 cm
3
(0.65 l)
Normal or premium petrol
Start System: Rewind starter
Speed range at idle mode: 2700-3400 min
-1
Speed at engagement: 4700 min
-1
Spark plug: TORCH, A5RTC/A7RTC
Oil specication: 4-stroke engine oil 15W40
Pole-mounted powered pruner
Weight with chainsaw and empty tank: 7.3 kg
Cutting length: 10"
Chain Clearance: 3/8"
Chain thickness: 0.050"
Chain type: 91P040X/OREGON
Guide rail type: 100SDEA318/OREGON
Max. engine speed with chain saw 10500 min
-1
Noise level according to EN ISO 22868 and
ISO 3744
Sound pressure level L
pA
: 90.28 dB(A)
Sound power level
WA
: 105.27 dB (A)
Uncertainty K: 2.5 dB (A)
Guaranteed sound power level
WA
: 114 dB (A)
Vibration level according to EN ISO 22867
Front handle: 3.527 m/s
2
Rear handle: 6.874 m/s
2
Uncertainty K: 1.5 m/s
2
Brush cutter and grass trimmer
Weight without cutting accessories with empty
tank: 7.3 kg
Cutting diameter: 255 mm (brush cutter)
430 mm (grass trimmer)
Thicket knife: ø255 x ø25.4 x 1.4 mm,
3 teeth, max. 10000 min
-1
Cutting thread / spools of thread:
ø2.4 mm, max. 10000 min
-1

Matrix PGT 4 in 1-S Specifications

General

Brand	Matrix
Model	PGT 4 in 1-S
Category	Lawn and Garden Equipment
Language	English