Matrix SETU VFX User Manual

Matrix SETU VFX Quick Start 9
During initialization, System LED (STS) will display following error/events/status:
During normal functioning, FXS/FXO Port LEDs will display following error/events/status:
During Off-hook state, FXS Port LED glows continuous Red. However, if the system is in
programming mode, the LED of the port from which you entered the programming mode will glow
continuously Green. After exiting the programming mode, the LED will turn Red again (displaying Off-
hook event).
LED Status Color Comment
Continuous On Red VoPP program download fail.
2000 ms On (Red)
5000 ms On (Green)
Red and
Green
Modules not detected.
1sec On - 1sec Off Green
SETU VFX started successfully.
Network link is Up.
SIP stack is Up.
CDR buffer is not full.
500 ms On - 500ms Off -
500 ms On - 500ms Off -
500 ms On - 500ms Off -
500 ms On - 500ms Off (4 Blinks)
Green
Network link is down.
SIP stack is down.
CDR buffer is not full.
500 ms On - 500ms Off -
500 ms On - 500ms Off -
500 ms On - 1500ms Off (3 Blinks)
Green
Network link is Up.
SIP stack is down.
CDR buffer is not full.
500 ms On - 500ms Off -
500 ms On - 500ms Off -
500 ms On - 500ms Off -
500 ms On - 500ms Off (4 Blinks)
Red
Network link is down.
SIP stack is down.
CDR buffer is full.
1sec On - 1sec Off Red
Network link is up.
SIP stack is down.
CDR buffer is full.
500 ms On - 500ms Off -
500 ms On - 500ms Off -
500 ms On - 1500ms Off (3 Blinks)
Red
Network link is up.
SIP stack is up.
CDR buffer is full.
LED Status Color Event/State/Status
Continuous OFF - Port Idle/Disable
400ms On - 200ms Off -
400ms On - 3000ms Off (2 Blinks)
Red Incoming Ring Event
Continuous On Red Off-hook Event
Continuous On Green Speech

Matrix SETU VFX Specifications

General

Brand	Matrix
Model	SETU VFX
Category	Gateway
Language	English