Matrix T3xm Service Manual

12
CHAPTER 3: TROUBLESHOOTING
3.4 Troubleshooting - No Function for Infrared Induction
1) SYMPTOM:
a. Turn on the power switch, but the infrared sensor don’t light up.
b. Under the precondition that two infrared sensors light up, start the running belt and put your
hand between two sensors, the running belt will not stop within 5 seconds.
2) SOLUTION:
a. Check if the sensor’s control board cord connected well
- if sensor’s control board cord connected well and sensors still don’t light up, try another one.
- if the moving belt doesn’t stop within 5 seconds when you put your hand between sensors, try
another one.

Matrix T3xm Specifications

General

Brand	Matrix
Model	T3xm
Category	Treadmill
Language	English