ASSEMBLY STEP 2
A Open hardware bag 2.
B With the console upside down, attach the
console mast caps to the console
using 4 bolts (e) and 4 spring
washers (b).
10
SOCKET HEAD CAP SCREW (M8 x 20mm)
Qty: 10
14
FLAT WASHER (6.2 x 12 x 1.6)
Qty: 10
BLACK HARDWARE BAG CONTENTS :
NOTE: The console mast caps are marked with an
L if they are to be used on the left-hand side of the
treadmill or an R if they are to be used on the right-
hand side of the treadmill. If the console mast caps
are assembled on the incorrect side of the treadmill,
the unit will not assemble correctly.
To Next Page
Loading...
Need help?
General
