17
4.6 ASSEMBLY STEPS R1x
SEATBACK COVER
1) Attach the seatback cover to the seatback.
CONSOLE MAST
1) Secure the upper console mast to the lower console mast using the four
screws (Z04). Alternately tighten each bolt using the #5 Allen Wrench.
Check the console mast to make sure it is securely fastened.
Z04
Z04
STEP 5
HANDLEBAR
1) Mount the upper handlebars to the console mast using four screws (Z04).
Tighten with the #5 Allen Wrench (Z32).
CONSOLE
1) Remove the four mounting bolts from the back of the console. Connect
the wire harnesses and heart rate wires that come from the console mast
into the plugs located in the back of the console. Attach the console to
the mast with the four bolts removed earlier.
To Next Page
Loading...
Need help?
General
