28
8.14 ENTERTAINMENT TROUBLESHOOTING – PICTURE FUZZY OR UNCLEAR
1. Remove the TV back cover (Figure A) Using a veried good piece of coax cable, hook the coax directly to the TV jack. This bypasses internal
connections for your machine or TV stand (Figure B).
2. If this does not clear your picture the issue is with the club's signal. Make sure that the coax has a signal strength of at least 10db.
3. If Step 1 does clear your picture, check the internal cables and ttings inside your machine. Make sure you have no damage (kinks, cuts etc)
and no stray wires or poor ttings on the ends of the cables anywhere that the coax cable is connected (Figures C & D). Fittings should have a
clean ush connector and no stray aluminum strands touching the center conductor. Replace or repair any suspect cables.
4. If nothing is visibly wrong with any of the cables, ttings, or connectors replace the internal coax cables and connectors with known good
parts.
FIGURE A FIGURE B
FIGURE C FIGURE D
CHAPTER 8: TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
