57
10.2 ASSEMBLY INSTRUCTIONS - CONTINUED
STEP 2
CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE
A Open BLACK HARDWARE BAG.
B Attach the REAR FRAME HANDLE (3) to
the MAIN FRAME (2) using 2 BOLTS (C).
C Attach the REAR FRAME COVER (4) to
the MAIN FRAME (2) using 2 BOLTS (D).
BLACK HARDWARE BAG
PART TYPE DESCRIPTION QTY
C SOCKET HEAD BOLT M8X20L 2
D PHILLIP HEAD BOLT M5X12L 2
RED HARDWARE BAGS
PART TYPE DESCRIPTION QTY
C SOCKET HEAD BOLT M8X20L 4
E TOOTH WASHER Φ8.5XΦ18.0X2.0T 4
A Carefully pull the CONSOLE CABLES (5)
through the CONSOLE MAST (6) using
the twist tie located inside the CONSOLE
MAST (6).
B Attach CONSOLE MAST (6) to MAIN
FRAME (2) using 4 BOLTS (C) and 4
TOOTH WASHERS (E).
To Next Page
Loading...
Need help?
General
