Matrix U3X-05 User Manual

64
10.5 TV BRACKET INSTALLATION
The Matrix U3x-05 Bike is capable of accepting a 15" TV via a bracket. Follow the instructions below to
install the TV and bracket. Use the instructions in the Entertainment Owner's Manual to program the TV
after installation.
1) Turn off power and disconnect the power cord.
2) Remove the console from the bike.
3) Remove the 2 screws holding the small silver back cover to the console and remove the back cover (Figures A & B).
4) Remove the 4 screws holding the rear half of the console to the front half and split the console (Figures C & D).
5) Remove the 5 screws holding the lower keypad plastic to the front of the console and remove the lower keypad plastic (Figures E & F).
FIGURE BFIGURE A
FIGURE DFIGURE C
FIGURE FFIGURE E
CHAPTER 10: BIKE SPECIFICATIONS AND ASSEMBLY GUIDE

Matrix U3X-05 Specifications

General

Brand	Matrix
Model	U3X-05
Category	Exercise Bike
Language	English