Maxtor Central Axis Quick Start Guide

12
Macintosh Installation (OS X 10.4.11 or later)
Part 1:
Plug it in.
1. Connect one end of the supplied Ethernet
cable to an Ethernet port on your router
or switch.
2. Connect the other end of the Ethernet
cable to the Ethernet port on your
Central Axis storage server.
3. Connect the round plug of the power
supply to the Central Axis storage server
power jack.
4. Connect the standard electrical plug
of the power supply to your AC power
source.
Part 2:
Turn it on.
1. Press the power button on the back of
your Central Axis storage server. On the
front panel, the power light on the left
illuminates and the status light on the
right flashes. The hard disk activity light
in the center flashes intermittently.
2. Wait for the status light to shine steadily.
For more information about the drive
LEDs, see the Maxtor Central Axis User
Guide for Macintosh found on the CD.

Maxtor Central Axis Specifications

General

Brand	Maxtor
Model	Central Axis
Category	Network Storage Server
Language	English