3
STEP 1
STEP 2
Using the Controls - Auto Dry Models
Select Temperature
In order to select the correct temperature, turn the
Temperature control to one of four choices; Regular,
Medium (select models), Delicate or Air Fluff.
DRYER TEMPS
Regular
Medium
(select models)
Delicate
Air Fluff
LOAD TYPE
Sturdy cottons or labels marked
Tumble Dry.
For wrinkle-free/permanent press
synthetics, lightweight cottons
labeled Tumble Dry Medium.
For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Items which need freshening.
Load tumbles with room
temperature air. Use the Time
Dry/Air Fluff cycle.
Select Options
Extended Tumble (select models)
Extended Tumble is provided to minimize wrinkles in
the Auto Dry Wrinkle Control cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the c
ycle. Clothes can be removed
any time during this portion of the cycle.
T
he additional 6
0 minute
s of unheated tumbling c
an
be c
anceled by turning the switch to
Off.
End of Cycle Signal
W
hen the c
ycle is complete, a signal will sound. On
select models, the End of Cycle Signal can be turned
down or
Off.
Remove load immediately to reduce wrinkling.
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry cycle, the control dial
should point between More Dry and Less Dry for most
loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. T
he Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Auto Dry Regular
T
he Auto Dry Regular c
ycle is de
signed to dry most
cottons and linens. At the end of the c
ycle, the clothe
s
are cooled for approximately 10 minutes to reduce
wrinkling.
Auto Dry Wrinkle Control
The Auto Dry Wrinkle Control cycle is designed to dry
wrinkle-free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. At the end of
the cycle, the clothes are cooled for approximately 25
minute
s to reduce wrinkling. If the load is not removed
from the dryer and
Extended Tumble (select models)
has been selected, the cycle will advance to Extended
Tumble which provides additional unheated tumbling
time. (See Step 2).
STEP 3
To Next Page
Loading...
Need help?
General