Mazda 2012 CX-9 User Manual

Black plate (411,1)
Hands-Free Setting
qDevice
Device registration
For the registration of a Bluetooth
equipped device to Bluetooth Hands-Free,
refer to
“Bluetooth Hands-Free Preparation”
(page 6-161).
Device selection
If several devices have been programmed,
the Bluetooth unit links the device last
programmed. If you would like to link a
different programmed device, it is
necessary to chang e the link. The order of
device priority after the link has been
changed is maintained even when the
ignition switch is turned off.
NOTE
If the device name cannot be displayed, “...” is
added at the end to the part of the title which
can be displayed.
Changing the link to on ly a Bluetooth
Hands-Free device
1. Press selection button 6 to display the
Bluetooth Hands-Free setting menu
screen.
2. Press selection button 3 to display the
link change screen and the current
pairing programming device name.
3. Press selection button 1, 2, 3, 4, 5, 6, or
7 to select the name of the device you
would like to change.
The “
” symbol disappears, and the
device name and
“Connection is in progress.” are
displayed.
4. When the link change is completed, a
“
” symbol and “Link Changed” are
displayed, and then it returns to the
normal display.
If an error occurs while trying to link a
device, “Error” is displayed and the
display returns to the link change
screen.
NOTE
If a link error occurs, check the programming
status of the Bluetooth Hands-Free device and
the location of the device in the vehicle (not in
the trunk or a metal-type box), and then try the
link operation again.
Changing the link to a Bluetooth
Hands-Free and Bluetooth audio device
1. Press selection button 6 to display the
Bluetooth Hands-Free setting menu
screen.
2. Press selection button 3 to display the
link change screen and the present
pairing programming device name.
3. Press selection button 1, 2, 3, 4, 5, 6, or
7 to select the name of the device you
would like to change.
4. The device name and
“Please Select Device” are displayed.
5. Press selection button 2 to select
“Phone”. The “
” symbol disappears,
and then “Connection is in progress.”
is displayed.
6. When the link change is completed, a
“
” symbol and “Link Changed” are
displayed, and then it returns to the
normal display.
If an error occurs while trying to
change the link, “Error” is displayed,
and then it returns to the link change
screen.
Interior Comfort
Bluetooth Hands-Free (Panel Operation)
6-167
CX-9_8AU3-EC-09G_Edition1 Page411
Monday, July 13 2009 7:12 PM
Form No.8AU3-EC-09G

Mazda 2012 CX-9 Specifications

General

Brand	Mazda
Model	2012 CX-9
Category	Automobile
Language	English