EasyManuals Logo
Home>McIntosh>Amplifier>MA7000

McIntosh MA7000 User Manual

McIntosh MA7000
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
Specifications
Specifications
Power Output
250 watts is the minimum sine wave continuous average
power output per channel, both channels operating
Output Load Impedance
2, 4 or 8 ohms
Rated Power Band
20Hz to 20,000Hz
Total Harmonic Distortion
0.005% maximum with both channels operating from 250
milliwatts to rated power, 20Hz to 20,000Hz
Dynamic Headroom
2.0dB
Frequency Response
+0, -0.5dB from 20Hz to 20,000Hz
+0, -3dB from 10Hz to 100,000Hz
Preamplifier Main Output (for rated input)
2.5V unbalanced (8V Maximun)
5.0V balanced (16V Maximun)
Sensitivity (for rated output)
High Level, 250mV unbalanced, 500mV balanced
Phono, 1.2 mV
Power Amp In, 2.5V
Signal To Noise Ratio (A-Weighted)
High Level, 100dB below rated output
Phono, 84dB below 5mV input
Power Amplifier, 115 below rated output
Intermodulation Distortion
0.005% maximum, if the instantaneous peak power is 500
watts or less per channel with both channels operating for
any combination of frequencies from 20Hz to 20,000Hz
Wide Band Damping Factor
Greater than 40
Input Impedance
High Level, 20K ohms
Phono, 47K ohms; 65pF
Power Amp In, 10K ohms
Maximum Input Signal
High Level, 8V unbalanced, 16V balanced
Phono, 45mV
Power Amplifier In, 16V
Main Output Impedance
50 ohms
Power Guard
Less than 2% THD with up to 16dB overdrive at 1,000Hz
Voltage Gain
High Level to Rec Output: 0dB
High Level to Main Output: 20dB
Phono to Rec Output: 46dB
Phono to Main Output: 66dB
Power Amplifier: 25dB
Equalizer Controls
Variable 12dB boost to 12dB cut at 30Hz, 150Hz, 500Hz,
1500Hz and 10,000Hz
Power Requirements
100 Volts, 50/60Hz at 8.0 amps
110 Volts, 50/60Hz at 7.2 amps
120 Volts, 50/60Hz at 6.6 amps
220 Volts, 50/60Hz at 3.3 amps
230 Volts, 50/60Hz at 3.3 amps
240 Volts, 50/60Hz at 3.3 amps
Standby: Less than 1 watt
Note: Refer to the rear panel of the MA7000 for the correct
voltage.
Overall Dimensions
Width is 17-1/2 inches (44.45cm)
Height is 9-7/16 inches (23.97cm) including feet
Depth is 22 inches (55.88cm) including the Front Panel,
Knobs and Cables
Weight
97.5 pounds (44.3 kg) net, 130.5 pounds (59.2 kg) in ship
-
ping carton
Shipping Carton Dimensions
Width is 29-1/2 inches (74.93cm)
Depth is 29 inches (73.66cm)
Height is 17 inches (43.18cm)

Other manuals for McIntosh MA7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the McIntosh MA7000 and is the answer not in the manual?

McIntosh MA7000 Specifications

General IconGeneral
Amplifier class-
Frequency range20 - 20000 Hz
Audio output channels2.0 channels
Peak power per channel250 W
Signal-to-Noise Ratio (SNR)115 dB
Total Harmonic Distortion (THD)0.005 %
XLR inYes
PurposeHome
Product colorBlack
Connectivity technologyWired
AC input voltage120 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth558.8 mm
Width444.5 mm
Height239.7 mm
Weight44300 g

Related product manuals