Installation
M4AC / MAC080 / 100 / 120 / 150 C/CR
1100mm
500mm 500mm
700mm
Safety Precautions
Before installing the air conditioner unit, please read the following safety precautions carefully
Warning
x Installation and maintenance should be performed by qualified persons who are familiar with
local code and regulation, and experienced with this type of appliance.
x All field wiring must be installed in accordance with the national wiring regulation.
x Ensure that the rated voltage of the unit corresponds to that of the name plate before
commencing wiring work according to the wiring diagram.
x The unit must be GROUNDED to prevent possible hazards due to insulation failure.
x All electrical wiring must not touch the refrigerant piping, compressor or any moving parts of the fan
motors.
x Confirm that the unit has been switched OFF before installing or servicing the unit.
x Do not touch the compressor or refrigerant piping without wearing gloves.
IMPORTANT
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
57
To Next Page
Loading...
Need help?
General
