Outlook
Operation Guide
1. Transmission Source
v The source where the signal will be transmitted.
2. Signal Transmission Indication
v Blink to confirm that the last setting has been transmitted to the unit.
3. Temperature Setting
v To set the desired room temperature, press the or button to increase or decrease
the set temperature.
v The temperature setting range is from 16°C to 30°C (optional setting 20°C to 30°C).
4. Personalize Setting
v Press and hold for 3s, then will blink. Press again to cycle between and .
v Set the desire setting, then leave the handset for 4s without pressing any key and it will
save the setting into the programme.
v Press once to activate the P1 setting, press again to cycle between P1 and P2.
v Press any key to deactivate the personalize setting.
To Next Page
Loading...
Need help?
General
