Need help?Do you have a question about the Megger MJ15 and is the answer not in the manual?
Checks to verify the instrument's correct operation before use.
Procedure for measuring AC and DC voltages using the instrument.
Steps for performing insulation resistance tests.
Guidance on selecting and using appropriate test leads.
Checks to verify the instrument's correct operation before use.
Procedure for measuring AC and DC voltages using the instrument.
Steps for performing insulation resistance tests.
Guidance on selecting and using appropriate test leads.
General| Test Voltages | 250V, 500V, 1000V |
|---|---|
| Display | Analog |
| Power Source | 8 x 1.5V AA batteries |
| Application | Insulation resistance testing |
| Safety Standards | IEC 61010-1 |
| Measurement Range | 0.01 MΩ to 2000 MΩ |
To Next Page
