379Cleaning and care of the vehicle
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
Wiper blades To prevent damage to the hood or the wipers, the wiper
arms should only be folded forward in the position
shown above.
• Turn electronic key in starter switch to position 1.
• Turn combination switch to position I, see page 160.
• Once the wiper arms are in the position shown
above, turn key in starter switch to position 0.
Note:
For safety reasons, remove electronic key from
starter switch before cleaning the wiper blades,
otherwise the wiper motor can suddenly turn on and
cause injury.
• Turn combination switch to position 0, see page 160.
Clean the wiper blade rubber with a clean cloth and
detergent solution.
To Next Page
Loading...
Need help?
General
