133
Controls in detail
Control system
Resetting fuel consumption statistics
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
왘 Press and hold the reset knob in the
instrument cluster (
컄 page 22) until
the value is reset to
0
.
Call up range (distance to empty)
왘 Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the
display:
RANGE
.
In the display you will see the
calculated range based on the current
fuel tank level.
i
All statistics stored since the last
engine start will be reset approximately
four hours after the key in the starter
switch is turned to position 0 or
removed from the starter switch.
Resetting will not occur if you turn the
key back to position 1 or 2 within this
time period.
To Next Page
Loading...
Need help?
General
