338
Technical data
Fuels, coolants, lubricants etc.
Windshield washer and headlamp
cleaning* system
Both the windshield and headlamp washer
systems are supplied from the windshield
washer fluid reservoir.
The washer fluid reservoir has a capacity of
approx.
앫 6.4 US qt (6.0 l) in vehicles with head-
lamp cleaning system*
앫 3.2 US qt (3.0 l) in vehicles without
headlamp cleaning system
왘 Refill the reservoir with MB Windshield
Washer Concentrate “S” and water (or
concentrate and commercially avail-
able premixed windshield washer sol-
vent/antifreeze, depending on ambient
temperatures).
Washer fluid mixing ratio
For temperatures above freezing use
MB Windshield Washer Concentrate “S”
and water:
앫 1part“S” to 100parts water
[40ml“S” to 1gallon (4l) water]
For temperatures below freezing use
MB Windshield Washer Concentrate “S”
and commercially available premixed
windshield washer solvent/antifreeze:
앫 1part“S” to 100parts solvent
[40ml“S” to 1gallon (4l) solvent]
Warning! G
Washer solvent/antifreeze is highly flamma-
ble. Do not spill washer solvent/antifreeze
on hot engine parts, because it may burn.
You can be seriously burned.
To Next Page
Loading...
Need help?
General
