112
Safety and Security
Anti-theft systems
Arming the alarm system
The alarm system indicator lamp is located
to the lower left of the hazard warning
flasher.
1 Alarm system indicator lamp
왘 Lock the vehicle with the SmartKey or
with KEYLESS-GO* (
컄 page 71).
The turn signal lamps flash three times
to indicate that the vehicle is locked.
The alarm system is armed within ap-
proximately 10 seconds. Alarm system
indicator lamp 1 flashes.
Disarming the alarm system
왘 Unlock the vehicle with the SmartKey
or with KEYLESS-GO* (
컄 page 40).
The turn signal lamps flash once to
indicate that the alarm system is
disarmed. Indicator lamp 1 goes out.
Canceling the alarm
To cancel the alarm:
With the SmartKey
왘 Insert the SmartKey in the starter
switch.
or
왘 Press the Œ or ‹ button on the
SmartKey.
With KEYLESS-GO*
왘 Grasp an outside door handle.
The SmartKey with KEYLESS-GO must
be within 3 ft (1 m) of the vehicle.
or
왘 Press the KEYLESS-GO start/stop
button (
컄 page 43).
The SmartKey with KEYLESS-GO must
be inside the vehicle.
i
If the turn signal lamps do not flash three
times, one of the following elements may not be
properly closed:
ì•« a door
ì•« the tailgate
Close the respective element and lock the
vehicle again.
i
The alarm system will rearm automatically
again after approximately 40 seconds if neither a
door nor the tailgate is opened.
To Next Page
Loading...
Need help?
General
