Mercedes-Benz 2007 GL 320 CDI User Manual

170
Controls in detail
Control system
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
왘 Press button k or j.
The stored messages will now be
displayed in the order in which they
have occurred. For malfunctions and
warning messages, see “Vehicle status
messages in the multifunction display”
(
컄 page 451).
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display
앫 when the SmartKey in the starter
switch is turned to position 0 or
removed from the starter switch.
or
앫 when you turn off the engine by
pressing the KEYLESS-GO* start/stop
button (
컄 page 70) in the starter
switch once and open the driver’s door
(this puts the starter switch in
position 0, same as with the SmartKey
removed from the starter switch)
Settings menu
In the
Settings menu there are two
functions:
앫 The function Reset to factory
settings?
, with which you can reset all
the settings to the original factory
settings.
앫 A collection of submenus with which
you can make individual settings for
your vehicle.
왘 Press button è or ÿ repeatedly
until the
Settings menu appears in the
multifunction display.
i
After you have scrolled through all recorded
status messages, the first recorded message
appears again.
i
The vehicle status message memory will be
cleared when you turn the SmartKey in the start-
er switch to position 1 or 2, or when you press
the KEYLESS-GO* start/stop button once or
twice without depressing the brake pedal. You
will then only see high priority messages in the
multifunction display (
컄 page 451).

Mercedes-Benz 2007 GL 320 CDI Specifications

General

Brand	Mercedes-Benz
Model	2007 GL 320 CDI
Category	Automobile
Language	English