164
Controls in detail
Control system
Fuel consumption statistics after start
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the left
multifunction display:
From start.
1 Distance driven since start
2 Average speed since start
3 Time elapsed since start
4 Average fuel consumption since start
Fuel consumption since last reset
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until you see this message in the left
multifunction display:
From reset.
1 Distance driven since last reset
2 Average speed since last reset
3 Time elapsed since last reset
4 Average fuel consumption since last re-
set
Resetting fuel consumption statistics
왘 Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
왘 Press button j or k repeatedly
until you see the reading that you want
to reset in the left multifunction dis-
play.
왘 Press and hold the reset button in the
instrument cluster (
컄 page 27) until
the value is reset to
0
.
i
All statistics stored since the last engine
start will be reset approximately 4 hours after
the SmartKey in the starter switch is turned to
position 0 or removed from the starter switch.
Resetting will not occur if you turn the SmartKey
back to position 1 or 2 within this time period.
i
The fuel consumption statistics reset auto-
matically to
0
when either of the following values
is exceeded:
ì•« distance covered:100000 miles
ì•« time elapsed: 10000 hours
To Next Page
Loading...
Need help?
General
