197
Controls in detail
Power windows
Opening the door windows
왘 Press switch 1 or 2 to the resistance
point.
The corresponding door window will
move downwards until you release the
switch.
Opening the rear side windows when
the hardtop is closed:
왘 Open the door window.
왘 Press switch 1 or 2 to the resistance
point again.
The corresponding rear side window
will open completely.
Closing the door windows
왘 Pull switch 1 or 2 to the resistance
point.
The corresponding door window will
move upwards until you release the
switch.
Closing the rear side windows if the
hardtop is closed:
왘 Close the door window.
왘 Pull and hold switch 1 or 2.
The corresponding rear side window
will move upwards until you release the
switch.
Fully opening the door windows
(Express-open)
왘 Press switch 1 or 2 past the resis-
tance point and release.
The corresponding door window opens
completely.
i
If the hardtop is open, the respective rear
side window will also open automatically.
Warning! G
If you pull and hold the switch up when clos-
ing the door window, and upward movement
of the door window is blocked by some ob-
struction including but not limited to arms,
hands, fingers, etc., the automatic reversal
will not operate.
i
If the hardtop is open, the respective rear
side window will also open automatically.
To Next Page
Loading...
Need help?
General
