*
NOTE Damage to the ceramic brake disk
when changing a wheel
Mercedes-AMG vehicles with ceramic
brake disks: during removal and reposition‐
ing of the wheel, the wheel rim may strike
the ceramic brake disk and damage it.
#
Take particular care.
#
Ask another person for assistance or
use a second centering pin.
#
When changing the wheel, avoid exerting any
force on the brake discs.
This can lead to impaired comfort during
braking.
Installing/removing plastic hub caps
Removing
#
Remove socket 2 and lug wrench 3 from
the vehicle tool kit (/ page 36).
#
Position socket 2 on hub cap 1.
#
Position wheel wrench 3 on socket 2.
#
Using wheel wrench 3, turn hub cap 1
counter-clockwise and remove it.
Installing
#
Before installing, check hub cap 1 and the
wheel area for dirt, and clean if necessary.
#
Position hub cap 1 and turn until it is in the
right position.
#
Position socket 2 on hub cap 1.
#
Position lug wrench 3 on socket 2 and
tighten hub cap 1.
Specified tightening torque: 18 lb-ft
(25 Nm).
Wheels and tires
37
To Next Page
Loading...
Need help?
General
