DYNAMIC SELECT switch
Function of the DYNAMIC SELECT switch
%
This chapter describes the function of the
DYNAMIC SELECT switch for the
Mercedes‑AMG GLE 53 4MATIC+.
Use the DYNAMIC SELECT switch to change
between the following drive programs:
ë
(Sand): off-road driving, on fine, loose
ground
F
(Trail): off-road driving, not on firm road
surfaces
o
(Slippery): optimized pulling away and
driving characteristics in wintry and slip‐
pery road conditions
=
(Individual): individual settings
A
(Comfort): comfortable and economical
driving style
C
(Sport): sporty driving style
B
(Sport +): particularly sporty driving style
Mercedes-AMG recommends selecting the drive
program A when in city traffic or stop-and-go
traffic.
Depending on the drive program selected, the
following vehicle characteristics will change:
R
Drive
-
Engine and transmission management
-
Active Distance Assist DISTRONIC
R
AMG Dynamics
-
The agility functions are automatically
selected depending on the drive program.
-
The steering, shift timing point, all-wheel
drive and stabilization functions are adap‐
ted to the selected drive program.
R
Suspension
-
Vehicle level
-
Suspension setting
R
Position of the exhaust gas flaps
R
Availability of glide mode
%
You can also change the following vehicle
characteristics using the buttons in the cen‐
ter console:
R
Position of the exhaust gas flaps
R
Suspension
Function of the DYNAMIC SELECT switch
%
This chapter describes the function of the
DYNAMIC SELECT switch for the
Mercedes‑AMG GLE 63 4MATIC+ and
GLE 63 S 4MATIC+.
Use the DYNAMIC SELECT switch to change
between the following drive programs:
o
(Slippery): optimized pulling away and
driving characteristics in wintry and slip‐
pery road conditions
=
(Individual): individual settings
A
(Comfort): comfortable and economical
driving style
C
(Sport): sporty driving style
B
(Sport +): particularly sporty driving style
12
Driving and parking
To Next Page
Loading...
Need help?
General
