Warm-up (example)
1
Digital speedometer
2
Engine oil temperature
3
Transmission oil temperature
4
Boost pressure
If the engine or transmission is not at normal
operating temperature, the multifunction display
will show temperature 2 or 3 in blue. Avoid
using the full engine power output during this
time.
Engine data (example)
1
Current power output
2
Current torque
When current power output 1 or current torque
2 reaches the maximum value, the digital value
will briefly be stationary. The bar display will
continue.
SETUP in Mercedes-AMG vehicles (example)
1
Drive system setting:
Reduced/Moderate/Sport/Dynamic/Sand/
Trail/Race
2
Transmission position:
D/M
3
AMG DYNAMICS:
Basic/Advanced/Pro/Master/Slide/Trac‐
tion
4
Suspension tuning:
Comfort/Sport/Sport+/Sand/Trail
5
Exhaust system:
Balanced/Powerful
24
Instrument Display and on-board computer
To Next Page
Loading...
Need help?
General
