Replacing the front bulbs
Fitting/removing the cover on the front
wheel arch
You must remove the cover of the front wheel
housing before you can change the front turn
signal lamp.
X
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Turn rotary knob : 180° outwards until it
stops using a suitable object.
Cover ; is released.
X
Fold cover ; upwards.
X
To fit: insert cover ; into the left, right and
two lower catches.
X
Turn rotary knob : 180° inwards until it
stops using a suitable object.
Cover ; is locked.
Dipped-beam headlamps
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anti-clockwise and
pull it out.
X
Turn bulb holder ; anti-clockwise and pull
it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Main-beam headlamps
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover : anti-clockwise and
pull it out.
X
Turn bulb holder ; anti-clockwise and pull
it out.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; into the lamp and turn
it clockwise.
X
Align housing cover : and turn it clock-
wise until it engages.
Replacing bulbs (vehicles with halogen headlamps)
143
Lights and windscreen wipers
Z