In addition, the current drive program settings
are displayed briefly in the multimedia system
display.
You can also change gear yourself using the
steering wheel paddle shifters. For further infor-
mation on the manual drive program
(
Y page 151).
Additional settings
:
Position of the exhaust flap (Y page 142)
;
ECO start/stop function (Y page 140)
=
ESP
®
(Y page 70)
?
Suspension (Y page 180)
A
Permanent activation of manual gearshifting
(
Y page 151)
When you press buttons : - A the corre-
sponding setting is selected. The DYNAMIC
SELECT switch setting is overwritten.
If you switch to drive program I, all stored char-
acteristics will be accepted. This is also the case
if you have previously pressed one of buttons :
- A.
i
Mercedes-AMG C 43 4MATIC In a few
countries, the ECO start/stop function is
deactivated at the factory due to the fuel
grade available. In this case, the ECO start/
stop function is not available in any drive pro-
gram, regardless of the display in the multi-
media system display.
All other models
Hybrid vehicles: observe the notes on the
DYNAMIC SELECT switch in the separate Oper-
ator's Manual.
Use the DYNAMIC SELECT switch to change the
drive program.
Depending on the drive program selected the
following vehicle characteristics will change:
R
the drive (engine and transmission manage-
ment)
R
the suspension.
R
the steering.
R
the availability of the ECO start/stop function
R
the climate control
-
the climate control settings
-
the rear window defroster operation period
-
the performance of the seat heating
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program C is
activated. For further information about starting
the engine, see (
Y page 138).
X
Push DYNAMIC SELECT switch : forward or
back until the desired drive program is selec-
ted.
The status icon of the selected drive program
is shown in the multifunction display.
In addition, the current drive program settings
are displayed briefly in the multimedia system
display.
i
In a few countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade. In this case, the ECO
start/stop function is not available in any
drive program, regardless of the display in the
multimedia system display.
Available drive programs:
I Individual Individual settings
S+ Sport Plus Particularly sporty driving
characteristics
S Sport Sporty driving characteris-
tics
DYNAMIC SELECT switch
145
Driving and parking
Z
To Next Page
Loading...
Need help?
General
