Changing a wheelChanging a wheel
#
Be sure to also observe the notes on changing
a wheel in the Operator's Manual of your vehi-
cle.
InstInstalling/ralling/remoemoving tving the hub caphe hub cap
RRemoemovingving
#
Remove socket 2 and lug wrench 3 from
the vehicle tool kit.
#
Position socket 2 on hub cap 1.
#
Position wheel wrench 3 on socket 2.
#
Using wheel wrench 3, turn hub cap 1
counter-clockwise and remove it.
InstInstallingalling
#
Before installing, check hub cap 1 and the
wheel area for dirt, and clean if necessary.
#
Position hub cap 1 and turn until it is in the
right position.
#
Position socket 2 on hub cap 1.
#
Position lug wrench 3 on socket 2 and
tighten hub cap 1.
%
Specied
Specied tighttightening tening torqorque:ue: 18 lb- (25 Nm).
NNoottes on Tres on Tracack Tk Tirireses
Track Tires are sports tires, which can be distin-
guished by their special tire tread and tire com-
pound. These characteristics combine to provide
signicantly higher levels of grip on a dry road sur-
face than conventional tires.
&
WWARNINGARNING Risk of accident due to the tire
tread depth diminishing more quickly
Due to the tire compound, the tire tread depth
can diminish more quickly on these tires than
on customary tires.
Driving at low temperatures of 50°F (10°C)
and below, rain and bodies of water can lead
to hydroplaning and, as a result, loss of con-
trol of the vehicle.
#
When the roads are wet and/or in low
temperatures, replace tires with suitable
tires in good time.
#
In the case of sudden rain, drive
extremely carefully and slowly, especially
when the roads are wet or in low temper-
atures.
3030
Wheels and tires
To Next Page
Loading...
Need help?
General
