4
° Continuous wiping, slow
5
¯ Continuous wiping, fast
#
Turn the combination switch to the correct
position 1 - 5.
#
Single wipe/washing: push the button on
the combination switch in the direction of
arrow 1.
R
í Single wipe
R
î Wipes with washer fluid
Switching the rear window wiper on/off
1
ô Single wipe/washing
2
è Intermittent wipe
#
Single wipe: press button 1 to the point of
resistance.
#
Wiping with washer fluid: press button 1
beyond the point of resistance.
#
Switching intermittent wipe on/off: press
button 2.
The è symbol will appear on the instru‐
ment cluster when the rear window wiper is
switched on.
Changing the windshield wiper blades
&
WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
#
Always switch off the windshield wipers
and the ignition before changing the
wiper blades.
Moving the wiper arms into the replacement
position
#
Switch the ignition on and switch off again
immediately.
#
Within around 15 seconds, press and hold
the î button on the combination switch
Light and visibility
121
To Next Page
Loading...
Need help?
General
