Switching the seat heating on/off
&
WARNING Risk of burns due to repeat‐
edly switching on the seat heating
Repeatedly switching on the seat heating can
cause the seat cushion and seat backrest
padding to become very hot.
The health of persons with limited tempera‐
ture sensitivity or a limited ability to react to
high temperatures may be affected or they
may even suffer burn-like injuries.
#
Do not repeatedly switch on the seat
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it is
switched on repeatedly.
*
NOTE Damage to the seats caused by
objects or documents when the seat
heating is switched on
When the seat heating is switched on, over‐
heating may occur due to objects or docu‐
ments placed on the seats, e.g. seat cush‐
ions or child seats. This could cause damage
to the seat surface.
#
Make sure that no objects or docu‐
ments are on the seats when the seat
heating is switched on.
Requirements:
R
The power supply is switched on.
#
Press button 1 repeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are off, the seat heating is switched
off.
%
The seat heating will automatically switch
down from the three heating levels after 8,
10 and 20 minutes until the seat heating
switches off.
Switching the seat ventilation on/off
Requirements:
R
The power supply is switched on.
Seats and stowing
93
To Next Page
Loading...
Need help?
General
