6. Call Pick up: Press to accept
incoming call
7. Hangup: Press to hang up/
reject call, including Tele Aid
and
8. Previous system: Press to
scroll back through all the systems
9. Next system: Press to scroll
forward through all the systems
10. Next display: Press to access
the next display in the system
11. Previous display: Press
to access the previous display in
the system
To access multi-function selection:
Press (9) or
(8)
to scroll
system menus then press
(10 or 11) to scroll pages
1. Multi-function steering wheel
Operates audio system, telephone*,
trip odometer and selected system
option settings using the steering
wheel controls
The multi-function display (2)
changes dependent on the function
being accessed
For information on operating
the audio system, telephone*
or navigation system, see the
COMAND System manual or
COMAND System Quick Tips
®
2. Multi-function display
Displays information based on
buttons activated on multi-function
steering wheel or information the
vehicle communicates to the driver
3. Voice control stalk for audio/
telephone function*
To activate/deactivate: Tap lever
rearward to activate/perform
SEND function
Tap lever forward to cancel
recognition/perform END function
See Voice Recognition
Operation Guide
4. Volume-down: Press to
decrease volume/select option
5. Volume-up: Press to increase
volume/select option
For individual settings controlled
by multi-function steering wheel,
see Operator’s Manual
To change multi-function settings:
Press (9 or 8) repeatedly until
SETTINGS appears in display;
press (10 or 11) until the
desired setting menu appears in display;
press (5 or 4) to select or move
highlighted display (this changes
settings within the selected menu)
To return to factory settings:
Press (9 or 8) repeatedly until
SETTINGS appears in display;
Press reset button on instrument
panel for 3 seconds until RESET TO
FACTORY SETTINGS? appears;
Press reset button on instrument
panel within 5 seconds, system is
now reset to factory settings