:
Telligent
®
automatic gearshift (Automa-
ticShift
®
) fuse
;
Fuse for equipment power socket
=
Fuse for intake air pre-heating
X
Interrupt the power supply using the bat-
tery
isolator switch; see the vehicle's Oper-
ating Instructions.
X
Remove the battery cover; see the vehicle's
Operating Instructions.
X
Spray the connections in the battery com-
partment with contact spray and lubricate
them with acid-proof grease.
X
Replace the battery cover; see the vehicle's
Operating Instructions.
X
Restore the power supply using the battery
isolator switch; see the vehicle's Operating
Instructions.
Dual-layer protective coating
X
Check the protective agents every week.
X
Have paint and corrosion damage repaired
immediately.
To remove defects or re-apply dual-layer pro-
tection, please consult a qualified specialist
workshop. It has the necessary specialist
knowledge, tools and qualifications to cor-
rectly carry out the work required on your
vehicle. Mercedes-Benz recommends that
you use a Mercedes-Benz Service Centre for
this purpose.
Paintwork damage and corrosion
damage
To
repair paint and corrosion damage, please
consult a qualified specialist workshop. It has
the necessary specialist knowledge, tools
and qualifications to correctly carry out the
work required on your vehicle. Mercedes-
Benz recommends that you use a Mercedes-
Benz Service Centre for this purpose.
Engine compartment
X
After cleaning the engine compartment:
spray the engine attachments and the
engine compartment with engine sealant.
Cab
Unimog 20:
X
Check the body cavity sealing once a year
and touch up where necessary.
Unimog 300/400/500:
X
After cleaning the body cavities of the cab
frame, apply body cavity sealing.
X
Check the body cavity sealing once a year
and touch up where necessary.
X
Renew the body cavity sealing every 3
years.
Trailer tow hitch
Trailer tow hitch
17
Maintenance and care
To Next Page
Loading...
Need help?
General
