EasyManuals Logo
Home>Mercury>Outboard Motor>2.5

Mercury 2.5 Operation And Installation Manual

Mercury 2.5
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
GASOLINE/OIL MIXING RATIO CHART
Gas/Oil
Ratio
3.8 liters
(1 gal.)gas
11.5 liters (3 gal.)
gas
23 liters (6 gal.) gas
50:1 (2%)
89 ml (3 fl. oz.) oil 237 ml (8 fl. oz.) oil
473 ml (16 fl. oz.)
oil
MIXING PROCEDURE
Pour the full amount of oil along with approximately one gallon of gasoline into
an approved container. Shake the two together until they are thoroughly mixed.
Add the remainder of gasoline and shake container to ensure mixing.
Filling Fuel Tank
!
WARNING
Avoid serious injury or death from a gasoline fire or explosion. Use caution
when filling fuel tanks. Always stop the engine and do not smoke or allow
open flames or sparks in the area while filling fuel tanks.
Fill fuel tanks outdoors away from heat, sparks, and open flames.
Always stop engine before refilling tanks.
Do not overfill the fuel tank. Fuel will expand in volume as its temperature rises
and can leak under pressure if the tank is completely filled.
The oil and fuel mixture should always be thoroughly mixed in an approved
container before pouring into motor fuel tank. Do not pour separately into fuel
tank.
Pour fuel into tank through a fine mesh strainer to remove dirt which may be
present.
FUEL AND OIL
eng 27

Table of Contents

Other manuals for Mercury 2.5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 2.5 and is the answer not in the manual?

Mercury 2.5 Specifications

General IconGeneral
BrandMercury
Model2.5
CategoryOutboard Motor
LanguageEnglish

Related product manuals