FEATURES AND CONTROLS
25
Warning Horn
Function Sound Description
Engine running cold at
slow speed
One beep Engine is not reaching correct
temperature while operating
below 1000 RPM.
ENGINE GUARDIAN SYSTEM
The Engine Guardian System monitors the critical sensors on the engine for any early indications of problems.
The system will respond to a problem by emitting a continuous beep and/or reducing engine power in order to
provide engine protection.
If Guardian System has been activated, reduce throttle speed. The problem will need to be identified and corrected,
if possible. The system must be reset before the engine will operate at higher speeds. Moving the throttle lever
back to the idle position will reset the system.
SMARTCRAFT PRODUCT
A Mercury SmartCraft System instrument package can be purchased for this outboard. A few of the functions the
instrument package will display are engine RPM, coolant temperature, battery voltage, fuel consumption and
engine operating hours.
The SmartCraft Instrument package will also aid in Engine Guardian diagnostics. The SmartCraft Instrument
package will display critical engine alarm data and potential problems.
Remote Control Features
PANEL MOUNT FEATURES
3409
+
-
a
b
c
d
h
e
f
g
a - Lanyard/lanyard stop switch ‑ Refer to
General Information ‑ Lanyard Stop Switch.
b - Control handle – Forward (F), Neutral (N),
Reverse (R).
c - Shift lock ‑ Refer to Operation ‑ Gear
Shifting.
d - Trim/tilt switch ‑ Refer to Power Trim and
Tilt.
e - Throttle only button ‑ Allows the boat operator
to increase engine RPM for warm‑up, without
shifting the engine into gear.
f - Stop/start button ‑ Allows the boat operator to
start or stop the engine without using the
ignition key.
g - Detent tension adjustment ‑ Refer to
Operation ‑ Remote Control Adjustments.
h - Control handle friction adjustment screw ‑
Refer to Operation ‑ Remote Control
Adjustments.
To Next Page
Loading...
Need help?
General