EasyManuals Logo
Home>Mercury>Outboard Motor>225 OptiMax

Mercury 225 OptiMax Manual

Mercury 225 OptiMax
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
FUEL AND OIL
35
Mercury OptiMax/DFI or Quicksilver DFI 2‑Cycle Engine Oil is
recommended for your engine. If Mercury OptiMax/DFI or
Quicksilver DFI 2‑Cycle Engine Oil is not available, we recommend
using Mercury or Quicksilver TC‑W3 Premium Plus 2‑Cycle Oil.
Severe engine damage may result from use of an inferior oil.
Fuel Additives
To minimize carbon deposit buildup in the engine, it is
recommended to add Mercury or Quicksilver Quickleen Engine
Treatment additive to the engine's fuel at each tank fill throughout
the boating season. Use additive as directed on container.
Fuel Requirements
Do not use pre‑mixed gas and oil in this engine. The engine
automatically receives extra oil during engine break‑in. Use a fresh
supply of the recommended gasoline during engine break‑in and
after engine break‑in.
Avoiding Fuel Flow Restriction
IMPORTANT: Adding components to the fuel supply system
(filters, valves, fittings, etc.) may restrict the fuel flow. This may
cause engine stalling at low speed, and/or a lean fuel condition at
high RPM that could cause engine damage.
Filling Remote Oil Tank
Remove filler cap and fill with the specified oil. Oil tank capacity is
11.5 liters (3 gallons). Replace filler cap and tighten securely.
IMPORTANT: Always make sure the oil tank caps are threaded
on tight. An air leak will prevent oil flow to the engine.
2723

Table of Contents

Other manuals for Mercury 225 OptiMax

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 225 OptiMax and is the answer not in the manual?

Mercury 225 OptiMax Specifications

General IconGeneral
BrandMercury
Model225 OptiMax
CategoryOutboard Motor
LanguageEnglish

Related product manuals