MAINTENANCE
66
4. Place a block of wood between gearcase and propeller to hold
propeller and remove propeller nut.
5. Pull propeller straight off shaft. If propeller is seized to the shaft
and cannot be removed, have the propeller removed by an
authorized dealer.
6. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C Marine
Lubricant with Teflon
Propeller shaft
92-802859A
1
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in salt water), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals and also each
time the propeller is removed.
To Next Page
Loading...
Need help?
General
