1
IMPORTANT:
Please read the complete instructions
before commencing fitting.
Do not attempt to install the product unless
you can tick all 4 boxes satisfactorily.
Check all the enclosure components are present
Check the installation kit is complete
Check that you have the tools required
Check the installation site is compatible with
the sizes of door supplied
The wall plugs supplied with the installation kit are
for use in solid walls. Hollow or ‘stud partition’
walls will require alternative fixings. Please consult
a hardware supplier for the correct type.
It may also be necessary to consult your tiling
supplier about the correct method for drilling your
tiles.
ATTENTION: TAKE EXTREME CARE WHEN
HANDLING GLASS, WEAR PROTECTIVE EYEWEAR
AND CLOTHING. DO NOT LEAVE THE GLASS ON
HARD SURFACES AND AVOID CONTACT BETWEEN
THE GLASS EDGES AND HARD SURFACES OR
IMPACTS DURING THE INSTALLATION.
To Next Page
Loading...
Need help?
General