SAFETY PRECAUTIONS:
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Be sure to use only properly rated power adapters or universal power supplies (pedal board power supplies) with appropriate attention paid to
proper voltage, amperage and ground schemes. Improper voltage/amperage being provided to the pedal may cause poor tone, inconsistent
performance, damage to the unit or all of the above. Proper voltage, amperage and grounding specs are supplied at the end of this manual.
• REPLACE THE BOTTOM LID after battery replacement or switch adjustment before the unit is used. Some electronic parts inside are static
sensitive and can be damaged from even a small static charge from contact with carpet or other conductive surfaces. DO NOT SET A POW-
ERED UNIT “CONTROLS UP” ON A METAL (or any) SURFACE WITH THE BOTTOM REMOVED!
Congratulations on your choice of MESA/Boogie
®
and welcome to the MESA
®
Family! The same passion for excellence, commitment to quality
and dedication to customer satisfaction is present in each and every product we make in our one- and-only shop in Petaluma, California, U.S.A.
Rest assured that the very same people that hand-build the finest amplifiers in the world built your pedal and you have access to the same
resources for help that all our customers do. Call on us anytime and enjoy!
Boogie® Five-Band Graphic
In the early ’70s, Boogie® sounds were most associated with singing, vocal-inspired lead work as Artists learned the newfound possibilities of its
high gain tube preamp and it’s game-changing sustain. The Graphic EQ aboard most fully loaded “Hun-Revs” of the day found their sliders set for
a subtle widening effect or enhanced Bass response to mimic bigger cabinets with the little 1x12 combo. As the era of Classic Rock faded and the
dawn of Metal appeared on the horizon in the late ‘70s and early ‘80s, the potential power of this on-board tool began to be fully realized. Graph-
ic-loaded MARK II™ Boogie’s became the norm and most of these on-board EQs were used to scoop the mids to extreme levels while boosting
lows and highs and this “V-Curve” became a new standard... the “other sound” (non-Brit) in Hard Rock and Metal. Since then MARK III™, Mark
IV™ and Mark V™ Boogie’s all have their place in Rock history through iconic Artists and the Graphic EQ has been an integral part of their sound.
The Five-Band Graphic EQ aboard the current MARK V™ Boogie® is again at the forefront of emerging styles as a whole new generation crafts
their own unique brand of heavy sounds in Djent and Nu-Metal genres. Now we’re proud to introduce the stand-alone Pedal version of this piece
To Next Page
Loading...
Need help?
General